Maintaining a swimming pool requires more than just regular cleaning and chemical balance. One of the most frustrating issues that homeowners encounter is a mysterious drop in pool water levels. If left unchecked, pool leaks can lead to significant water loss, increased water bills, and potential damage to your pool and surrounding areas. That’s why LeakXperts is here to guide you through a simple yet effective method for detecting pool leaks — the bucket test.

Understanding the Bucket Test for Pool Leak Detection

The bucket test is a straightforward technique that can help you determine whether the water loss in your pool is due to evaporation or an actual leak. By comparing the water level inside your pool with the water level inside a bucket placed on the pool steps, you can gauge whether the loss is within the range of normal evaporation or if there’s a potential leak. This test is particularly useful for deciding whether it’s time to call in the professionals for a thorough pool leak detection service.

Step-by-Step Guide to Conducting the Bucket Test

Step 1: Prepare the Equipment

Start by selecting a sturdy bucket and placing it on the pool steps so that it is immersed in 5 inches of water. Fill the bucket with pool water until it’s about an inch from the top.

Step 2: Mark the Water Level

Mark the water level inside the bucket with a waterproof marker or a piece of tape. This mark will serve as your reference point for the water level inside the bucket.

Now, mark the outside of the bucket along the water line made by the pool. This mark is just as important as the one made inside the bucket, so don’t forget this step.

Step 3: Observe for 24 Hours

Allow the bucket to sit undisturbed on the pool steps for the next 24 hours.

If you have an auto-fill device, make sure it is turned off. Additionally, keep people and pets away from the pool until the bucket test is concluded to prevent a loss of water from splashing.

Step 4: Compare the Water Levels

After 24 hours, compare the water level inside the bucket to the water level of your pool.

If both the bucket and pool water levels have decreased by the same amount, it’s likely that the water loss is due to evaporation.

However, if the pool water level has dropped significantly more than the bucket’s water level, this could be indicative of a pool leak.

When to Call in the Professionals

If the results of the bucket test indicate a substantial difference between the pool water level and the bucket’s water level, it’s time to consider seeking professional help. Pool leaks can often be elusive, hiding in plumbing lines, equipment, or underground structures. LeakXperts specializes in pool leak detection in Boca Raton and the surrounding areas and can pinpoint the source of the leak using advanced technology and expertise. Our experienced technicians will ensure a thorough and accurate assessment, followed by efficient pool leak repair if needed.

Schedule Your Pool Leak Detection Service Right Away

By conducting the bucket test for pool leak detection, you can gain valuable insights into the cause of water loss in your pool. If the results are inconclusive or if you suspect a leak, don’t hesitate to reach out to LeakXperts. Our dedicated team is committed to ensuring the health and longevity of your pool, saving you from unnecessary expenses and worries. Contact us today to schedule a professional pool leak detection service and keep your pool in perfect condition.